| |
| - ETHERNET 10 BASE T/10BT RJ45 TO 10 BASE FL/10BFL MULTI-MODE FIBER/MMF FIBER ST STAND ALONE CONVERTER | ||||||||||||
 |
| |||||||||||
| Manufacturer | UPC No. | MSRP |
| TRANSITION NETWORKS | 0648177009930 | $117.28 |
| Main Specifications | |
| Product Name | ETHERNET 10 BASE T/10BT RJ45 TO 10 BASE FL/10BFL MULTI-MODE FIBER/MMF FIBER ST STAND ALONE CONVERTER |
| Product Description | ETHERNET 10 BASE T/10BT RJ45 TO 10 BASE FL/10BFL MULTI-MODE FIBER/MMF FIBER ST STAND ALONE CONVERTER |
| Decsription | ETH 10BT RJ45 TO 10BFL 850NM |
| Additional description | MMF ST SA MEDIA CONVERTER 2KM |
| Manufacturer | TRANSITION NETWORKS |
| Manufacturer Part Number | E-TBT-FRL-05 |
| Alternative Part Number | E-TBT-FRL-05 |
| Retail Price | $175.00 |
| UPC Code | 0648177009930 |
| CPU Code | MEDIAC |
| Media Type | CPNT |
| Weight | 1.68 |
| Length | 12 |
| Width | 9.5 |
| Height | 3 |
| Features | |
| General Information - Product Line: E-TBT-FRL-05 Series - Marketing Information: Integrate mixed cabling environments using either switched or shared Ethernet. This full-featured media converter makes the migration from copper to fiber easier than ever before. Networking - Ports: 1 x RJ-45 10Base-T Port(s), 1 x ST 10Base-FL Port(s) Media & Performance - Connectivity Media: 10Base-T Category 3 (UTP/STP), 10Base-FL 850 nm Multimode (Fiber) - Data Transfer Rate: 10Mbps Ethernet - Supported Distance: 1.24 mi Multimode Fiber, 328.08 ft Category 3 UTP/STP Protocols & Management - Protocols Supported: Ethernet - Status LEDs: Unit LED: - Power: Lit for normal operation Port LEDs: - Link: Lit LED indicates unit is receiving link pulses from a compliant device - Receive: Flashing or lit LED indicates packets are being received Power Description - Input Voltage: 9V DC Environmental Conditions - Temperature: 32 to 122F (Operating), -13 to 185F (Storage) - Humidity: 5 to 95% (Operating) - Altitude: 0 to 10000 ft (Operating) Physical Characteristics - Dimensions: 1.0" (Width) - Shipping Dimensions: 3.00" (Height) x 9.50" (Width) x 12.00" (Depth) - Weight: 2 lb - Shipping Weight: 2 lb Miscellaneous - Additional Information: LANart Inside: - Select Transition Networks' product now use LANart's state-of-the-art ASIC technology. These chips go beyond the functions provided by off-the-shelf-silicon used by our competitors, to incorporate enhancements specific to media conversion technology such as link fault propagation and indicators for power, data and link status. AutoCross Technology: - AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration. LinkAlert: - Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management, requiring unnecessary time devoted to troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management. Switches: - S1: Enables/disables LinkAlert Fiber Optic Connector: - Min TX PWR: -16.0 dBm - Max TX PWR: -10.0 dBm - RX Sensitivity: -32.5 dBm - Max In PWR: -8.0 dBm - Link Budget: 16.5 dB - Certifications & Standards: - IEEE 802.3r 10BASE-T; 10BASE-FL - UL Listed - C-UL Listed (Canada) - CISPR/EN55022 Class A - FCC Class A - CE Mark Warranty & Support - Standard Warranty: Lifetime Limited - Parts Warranty & Labor: Lifetime |
